Last week, we explained why every individual gas inlet of our gas mixers is monitored as standard. However, monitoring the pressure on the outlet side is just as important.
In our gas mixers, the actual outlet pressure is continuously measured in bar, displayed and recorded. In systems without an integrated gas analyzer, the pressure transmitter is located directly before the gas outlet. In systems with gas analysis, the pressure is measured within the analyzer section.
This makes it possible to verify whether there is a sufficient pressure difference between the inlet and outlet for gas to flow through the flow controllers. The gas mixer can therefore detect when the required flow can no longer be achieved under the current pressure conditions, instead of continuing to fill the system even though sufficient gas flow is no longer possible.
Outlet pressure measurement is particularly important when the gas mixer is operated under pressure control with a buffer tank or ring main. A target pressure range is defined within which the system should operate. Our optimized buffer tank filling function also considers current and historical flow rates to fill the tank according to the actual demand.
The alarm limits can also be adapted individually to the respective process. If the pressure in the buffer tank or ring main falls below a defined value, for example, the alarm can be displayed directly on the device, transmitted via an alarm relay or recorded in the Cloud Dashboard. The relay can also be used to activate a warning light.
The recorded data can also provide valuable information outside operating hours. If the pressure in a closed system decreases, this may indicate a leak or a valve that has not been fully closed. Pressure monitoring does not replace a formal leak test, but it provides additional transparency regarding the condition of the system.
For applications with higher requirements, we also offer line rupture and leak monitoring. In addition to the pressure, this function monitors the actual gas flow. If the flow unexpectedly exceeds the defined level, the system can close the solenoid valves and limit further uncontrolled gas release.
Outlet pressure monitoring is not an additional option for our gas mixers; it is integrated as standard. A stable and reproducible gas supply does not end with precise mixing – it also includes the controlled delivery of the finished gas mixture.
How is the outlet pressure monitored in your application? If you operate a gas mixer with a buffer tank or ring main, we would be happy to discuss your specific requirements.

