Opens in a new tab

Success story Stadler: cost-effective helium substitution with ppm-accurate gas mixing

17 February 20262 min readGasyco GmbH
Success story Stadler: cost-effective helium substitution with ppm-accurate gas mixing
Success story Stadler: cost-effective helium substitution with ppm-accurate gas mixing

The sharp rise in helium prices presented the welding production of Stadler Rail AG in Hungary with a clear economic challenge: absorbing significant cost increases – without compromising on quality, process reliability or certification.

Together with Linde, we installed our intelligent gas mixing system including analysis in a redundant configuration. Below is the approved testimonial from László Koronczai (EWE/IWE at Stadler Hungary):

Stadler Rail AG – including Stadler Szolnok Kft. – has always placed particular emphasis on sustainability and environmental protection, and on optimising our processes and costs while maintaining or even improving quality. We pursue this philosophy together with our suppliers.

A few years ago, the world market price of one component (He) of the shielding gas we use began to rise dramatically. We therefore asked ourselves how we could replace this component so that the changeover would be as smooth as possible and, of course, our customers’ quality requirements would still be met in full.

In the course of ongoing technical consultations with our shielding gas supplier (Linde), the opportunity arose for Gasyco to provide mixing and analysis equipment that makes the industrial use of the new gas mixture, tested by our supplier, possible. (The new gas mixture can only be stored in cylinders for a limited time, and filling is very costly.)

After positive results from tests with the new gas mixture and economic calculations, we decided to introduce the new gas mixture initially for certain parts in manual welding.

Before the introduction, several important tasks had to be completed: building the system (while keeping the old system, so that the previous gas remained available as an alternative), certifying new technological tests, implementing new instructions, acceptance of the new gas by welders and customers, and so on.

Today we can say that we predominantly use the new shielding gas mixture in our production, in both manual and automated welding. We currently operate two mixing systems that work practically without problems.

With the Gasyco system, we have achieved the goal of our project and are now able to supply the shielding gas for our production in stable, good quality and on favourable economic terms.

László Koronczai, EWE/IWE, Stadler Szolnok Kft., 10 Feb 2026
Translated from German.