Small oxygen cylinders can pose a practical challenge when the gas supplier neither fills them nor offers them pre-filled.
An airline faced exactly this situation. We supplied an automated filling system that now allows the required cylinders to be refilled directly at its airport hub.
A simple filling setup was already in place but had caused problems during operation. The airline needed a more controlled filling process that could accommodate the requirements of the cylinders and the properties of the gas.
The GASYCO system controls the filling process using stored recipes for each cylinder type:
- Controlled pressure increase and adjustable target pressure The pressure ramp rate determines how quickly the pressure rises during filling. The target pressure is also defined in the recipe.
- Holding phase to compensate for temperature-related pressure fluctuations Once the target pressure is reached, an adjustable holding phase compensates for pressure fluctuations caused by temperature changes.
- Check for potential leaks An initial filling stage is followed by a test phase. The system checks pressure variations for signs of a potential leak. If the specified tolerance is exceeded, filling stops and a corresponding message appears.
- Integrated data logging and alarm history Recorded data and alarms can be exported and analysed on a computer, supporting the review of filling processes and troubleshooting.
For the operator, this provides an on-site filling solution. Cylinders no longer need to be transported to an external filling facility, while filling follows defined, repeatable procedures.
A filling station like this can also serve other airlines at the same airport, allowing several operators to share the infrastructure and its costs.
The solution can also be connected to GASYCO Connect. Transmitted measurement and operating data can be viewed and analysed centrally in the cloud dashboard. Remote access to the system is also possible.
On-site cylinder filling can benefit other applications too, including diving operations and filling cylinders for rescue helicopters. The system is designed around the gas, cylinder types and operating requirements.
Are you responsible for cylinder filling at an airline or airport? Or does your industry need its own filling solution?
Talk to us. Together, we can identify the right filling system for your application.

